SF150CWhere to Buy
Bostitch® Light Gauge Steel Sheathing Nailer
Collation Type: Wire Weld Depth Adjustment: Tool Free Dry Fire Lockout: true Fastener Type / Gauge:: 15 Degree Coil Roofing Firing / Acutation Mode: Sequential with Contact Trigger Included Magazine Angle: 15 Degree Magazine Capacity: 200 Magazine Loading: Bottom Load Operating Pressure: 70 - 120 psi Power Source: Pneumatic Tool Height: 10.64 in Tool Length: 12.15 in Tool Weight: 5.88 lbs Tool Width: 5 in
- Optimized pneumatic engine for high-production and the power to drive through steel
- Fastener centering jaws for drive quality in all sheathing products
- Tool-free depth of drive adjustment helps preserve sheathing
- Nail lockout helps prevent dry firing
- 1-piece nail canister door for fast fastener loading
- Adjustable rafter hook allows users to hang tool on rafters or joists
Frequently Asked Questions
Does Bostitch provide conversion kits to convert coil framing nailers to stick framing nailers or vice versa?Unfortunately, no at this time we do not have conversion kits for coil framing nailers to stick nailers.
How often should I oil my pneumatic tools? Can I add too much?For the professional that uses the tools every day, the tool should have oil added daily. Just a drop or two a day will assure that the oil keeps the internal components moist and well lubricated.
Too much oil can cause some feeding problems due to the pooling of excess oil in air ports and chambers. This will create worse problems in cold weather because the oil will naturally thicken a bit, slowing the reaction of the moving parts. If you suspect that too much oil is in the tool, prop the tool up with the air fitting pointing downward and allow excess oil to drain into an oil pan. This is usually enough to allow the tool to cycle smoothly again. Avoid oiling for a few days when this action has been taken. Keep in mind that too much oil is far better than not enough. Dry tools can cause many malfunctions and can cause component damage.
SF150C Nailer - Gypsum Fastener Report ESR-3380
What size fasteners does the SF150C take?This nailer uses 15° Wire Collated Coil Nails between 1" and 1-1/2" long.